Rigid Foam Insulation

Expanded polystyrene (EPS) is made up of beads of polystyrene. Small solid particles of polystyrene are made from the monomer of styrene. This polystyrene normally solid at room temperature . That can be melted at a higher temperature and re solidified for desired application. Expanded polystyrene volume is about 40 times to the original volume. EPS is lightweight closed cell cellular plastic material.

Expanded Polystyrene preformed pipe section is a tough, rigid, light weight, closed cell insulation foam commonly known as EPS. Normally having density from 8 Kg/M3 to 32 Kg/M3. Its close cell structure provides low water vapor permanence and hence it is widely used for thermal insulation. In food container, packaging industries, Building Insulation, Chilled water piping, refrigeration and many more.

Expanded Polystyrene preformed pipe section is a tough, rigid, light weight, closed cell insulation foam commonly known as EPS. Normally having density from 8 Kg/M3 to 32 Kg/M3. Its close cell structure provides low water vapor permanence and hence it is widely used for thermal insulation. In food container, packaging industries, Building Insulation, Chilled water piping, refrigeration and many more.

Polyurethane foam – Puff is basically polymer which is formed by the reaction of Isocynate with polyol. It is a Plastic Polymer. Puff Insulation form is available in both open cell and closed cell structure.

Polyurethane foam is basically polymer, which is form when Isocyanate and Polyol is reacted. These compounds are mixed and pour into mold to form a rigid, cellular foam. Resultant material is light weight polymer with excellent insulating property.

Polyurethane foam is basically polymer, which is form when Isocyanate and Polyol is reacted. These compounds are mixed to form a rigid, cellular foam. Resultant material is light weight polymer with excellent insulating property.

Insulation Pipe Support are designed to prevent direct Insulation Pipe Support are designed to prevent direct heat transfer between Pipe and tank through their Support. Thus it reduces conduction at each support. The support are not welded, each unit is shipped completely assembled. (Except Riser and Anchor Support) Normally the density of puff support Density is vary from 100 Kg/M3 to 350 Kg/M3 in some special case it can be up to 500 K/M3

Phenolic foam is a rigid cellular foam insulation material. Its polymer structure is made up from poly-condensation of phenol. It is a closed Cell material. Phenolic Foam is Non Flammable rigid insulation foam. It is untouched by fire, When it comes in contact of fire it turns dark Brown and retains its shape. Phenolic foam does not emit any toxic fumes or gases.

Extruded Polystyrene (XPS) Thermal Insulation Board is a rigid foam board having closed cell structure and is produced in a fully automated continuous extrusion process. Unique property of XPS boards is high compressive strength, higher R- Value, Low water vapor absorption.